Shannon Fabrics Cuddle Striped Baby Quilt

Nothing could be more perfect than making a quilt from Shannon Fabrics Cuddle fabric and Fairfield Toasty Cotton Batting for a new grandlittle. The best part is, this quilt can be created in an afternoon.

What you need to make this project

Materials: 1 1/2 yard Shannon Fabrics Premier Deer To Me Cuddle, Graphite; 2/3 yard Shannon Fabrics Premier Archer Cuddle Silver/Snow; 2/3 yard Shannon Fabrics Solid Cuddle, Steel; 2/3 yard Shannon Fabrics Solid Cuddle, Charcoal; Thread to match

Supplies: Sewing machine; Rotary cutter & mat; Scissors; Pins; Needle

Instructions

Step One

Using rotary cutter and mat, cut the 2/3 yard lengths of Cuddle fabric into strips 7″ by the length of the fabric. There will be 9 strips total.

Step Two

Cut the Toasty Cotton Batting to 60″ x 60″ and then, lay it out.

Place one strip of the Steel Cuddle, right side up, along one edge of batting. Then, place one strip of the Archer Cuddle on top of the Steel Cuddle, right sides together, being sure to have the nap of the Cuddle fabric going in the same direction. Pin in place and then, machine stitch with a 1/2 inch seam. Fold the Archer Cuddle open onto the batting.

Step Three

Next, place a strip of Charcoal Cuddle on top of the Archer Cuddle, right sides together. Pin in place and then, stitch with a 1/2 inch seam. Fold the Charcoal Cuddle open onto the batting.

Step Four

Repeat steps 2 & 3 two more times.

Step Five

Place the Deer to Me Cuddle on top of the quilted cuddle you just created, right sides together, being sure to have the nap going in the same direction. Pin in place and then, stitch around the outside edges with a 1/2″ seam, leaving a 6″ opening to turn. Trim corners and turn so that right sides are out. Stitch up the 6″ opening by hand.

Step Six

Machine top stitch 1/2″ around the edges of the quilt and your done!