Oly Fun™ Scarf Hanger

Categories: Utility, Gifts, Fashion Accessories

Let’s talk scarves and how we store them. If you like to grab and go, this fast and fun scarf hanger is for you. No wrinkles and you can see what you need with a quick glance. Gather your favorite color of  Oly*FunStiffen Interfacing, and some Curtain Grommets from Dritz® Home along with a few basic supplies and you will be ready to start creating your very own in no time at all. Fully illustrated instructions have been provided to assure your success. Have Fun!

What you need to make this project

One package of Oly-Fun™ Craft Pack Bubble Gum
1/2 yard Stiffen fusible rigid backing
One package Curtain Grommets by Dritz® HOME
Single Fold Bias Tape
One Yard Fringe Trim - Optional
One Yard Ribbon - Optional
Hanger of your choice
Scrap paper to create pattern
Sewing Machine
Basic sewing, pressing and measuring tools & supplies

Quick Shop


Oly-Fun® Craft Pack Bubble Gum


Price: $6.99

Buy 3 and pay only $3.99 each
Loading Updating cart...

Stiffen One Sided Fusible Interfacing 20″ Wide X 10 Yard Roll

Upload a File

Select a file from your computer to include with this purchase.


Price: $85.99

Loading Updating cart...


Step One

Using the hanger of your choice, lay the hanger on top of a piece of scrap paper and trace around the top edge of the hanger, adding 1/2 inch along the top edge and 1 inch down either side. Create the final pattern extending the hanger shape 16 inches down each side. Fully illustrated instructions have been provided. Diagram A

oly fun™ Scarf Hanger

Step Two

Cut out two layers from the Oly-Fun™ using your pattern. Diagram B

Step Three

Using the pattern, cut one from Stiffen interfacing. Following the manufacturer’s directions, press Stiffen to the back of one of the pieces of Oly*Fun™ cut earlier. NOTE:  Very carefully apply the interfacing using a pressing cloth and adjusting your iron to a synthetic setting. Diagram C

Step Four

Stitch bias tape along the top edges of each of the Oly*Fun™ Scarf Hanger pieces. Diagram D

Step Five

Turn under the top edges of the bias tape and stitch bias tape along either edge of the Oly*Fun™ Scarf Hanger pieces. Diagram E

Step Six

Insert the hanger. Diagram F

Step Seven

Stitch fringe trim along the bottom edge of the Oly*Fun™ Scarf Hanger, turning under the edges of the trim at either end. Diagram G

Step Eight

Center the Curtain Grommets on the front of the Oly*Fun™ Scarf Hanger and apply following the manufacturer’s directions. Diagram H

TIP: Be sure to use the template provided by Dritz® HOME Curtain Grommets. It makes marking, cutting and applying the grommets super simple.