Frankenstein Halloween with oly-fun™

Categories: Bags and Totes, Halloween

Halloween is a time for fun and collecting candy in a bag themed to match your costume only doubles the fun. Another idea might be to go for a bag and costume mix-up. Carrying a bag that has nothing to do with your chosen costume could just be even more fun.

What you need to make this project

Materials
Oly-fun™ GRAB AND GO - Kiwi
Oly-fun™ GRAB AND GO - Orange Crush
Oly-fun™ GRAB AND GO - Jet Black
Oly-fun™ GRAB AND GO - Snow White
Two 3/8 inch black buttons
Thread – Black
Foam Board or other stiff material – 4 inches x 15 inches

Download Pattern

Supplies
Basic sewing, measuring, cutting & pressing tools and supplies

Quick Shop

X

Oly-Fun® Craft Pack Kiwi

Quantity

Price: $6.99

Buy 3 and pay only $3.99 each

This product has sold out.

Instructions

Step One

Cut the following from Orange Crush Oly-fun™; one 17 ½ inches x 13 inch rectangle for the bag front, one 17 ½ inches x 27 inches for the back and two 4 inches x 24 inches for the straps

Step Two

Using the patterns provided cut out each of the pattern pieces from Oly-fun™

Step Three

Lay the bag front on a flat surface and turn over the top edge 1 inch, press then turn over a second time. Press. Top stitch along the first fold line. Diagram A

Step Four

Layer the pattern pieces onto the bag front in the order indicated on the pattern piece. Top stitch around the outside edges of each of the pieces. Stitch nose, month, eyebrows and facial accents as indicated on pattern pieces. Sew buttons in place. Diagram B

Step Five

Lay the bag back/sides on a flat surface and turn over the top edge 1 inch, press then turn over a second time. Press. Top stitch along the first fold line.

Step Six

With right sides together, stitch the bag front to the bag back along the side seams. Press the seams towards the back of the bag and topstitch. Diagram C

Step Seven

With right sides together fold the tote in half. Stitch the bottom seam. Diagram D

Step Eight

Fold the bottom of the tote so that the bottom seam aligns with the side creases and forms a point. Measure up from the point along the bottom seamline and mark a line 1 1/2 inches from the point. Stitch across this line. Diagram E

Step Nine

Fold the straps in half lengthwise and press. Open and fold each of the sides in towards the center fold. Press. Refold in half lengthwise and press. Top stitch along both edges. Diagram F

Step Ten

Pin the straps to the front and back of the tote, spacing them 8 inches apart. Top stitch to secure. Diagram G

Step Eleven

Insert foam board into bottom of bag.